CTC — CTC LXTAL 校准

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66

#include "gd32f30x.h"
#include "gd32f307c_eval.h"

void ctc_config(void);

/*!
    \brief      main function
    \param[in]  none
    \param[out] none
    \retval     none
*/
int main(void)
{
    /* init LED2*/
    gd_eval_led_init(LED2);

    /* enable IRC48M clock */
    RCU_ADDCTL |= RCU_ADDCTL_IRC48MEN; 
    /* wait till IRC48M is ready */
    while(0 == (RCU_ADDCTL & RCU_ADDCTL_IRC48MSTB)){
    }

    /* LXTAL clock config */
    rcu_periph_clock_enable(RCU_PMU);
    pmu_backup_write_enable();

    /* enable LXTAL clock */
    RCU_BDCTL |= RCU_BDCTL_LXTALEN;
    /* wait till LXTAL is ready */
    while(0 == (RCU_BDCTL & RCU_BDCTL_LXTALSTB)){
    }

    /* CTC peripheral clock enable */
    rcu_periph_clock_enable(RCU_CTC);
    /* CTC config */
    ctc_config();

    while(1){
        /* if the clock trim is OK */
        if(ctc_flag_get(CTC_FLAG_CKOK) != RESET){
            gd_eval_led_on(LED2);
        }else{
            gd_eval_led_off(LED2);
        }
    }
}

void ctc_config(void)
{
    /* config CTC reference signal source prescaler */
    ctc_refsource_prescaler_config(CTC_REFSOURCE_PSC_OFF);
    /* select reference signal source */
    ctc_refsource_signal_select(CTC_REFSOURCE_LXTAL);
    /* select reference signal source polarity */
    ctc_refsource_polarity_config(CTC_REFSOURCE_POLARITY_RISING);
    /* config hardware automatically trim mode */
    ctc_hardware_trim_mode_config(CTC_HARDWARE_TRIM_MODE_ENABLE);
    
    /* config CTC counter reload value, Fclock/Fref-1 */
    ctc_counter_reload_value_config(0x05B8);
    /* config clock trim base limit value, Fclock/Fref*0.0012/2 */
    ctc_clock_limit_value_config(0x0001);

    /* CTC counter enable */
    ctc_counter_enable();
}