1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
|
#include "at32f403a_407_board.h"
#include "at32f403a_407_clock.h"
#include "i2c_application.h"
#define I2C_TIMEOUT 0xFFFFFFFF
#define I2Cx_SPEED 100000
#define I2Cx_ADDRESS 0xA0
#define I2Cx_PORT I2C1
#define I2Cx_CLK CRM_I2C1_PERIPH_CLOCK
#define I2Cx_SCL_PIN GPIO_PINS_6
#define I2Cx_SCL_GPIO_PORT GPIOB
#define I2Cx_SCL_GPIO_CLK CRM_GPIOB_PERIPH_CLOCK
#define I2Cx_SDA_PIN GPIO_PINS_7
#define I2Cx_SDA_GPIO_PORT GPIOB
#define I2Cx_SDA_GPIO_CLK CRM_GPIOB_PERIPH_CLOCK
#define I2Cx_EVT_IRQn I2C1_EVT_IRQn
#define I2Cx_ERR_IRQn I2C1_ERR_IRQn
#define BUF_SIZE 8
#define MASTER_BOARD
void i2c_lowlevel_init(i2c_handle_type* hi2c)
{
gpio_init_type gpio_initstructure;
if(hi2c->i2cx == I2Cx_PORT)
{
/* i2c periph clock enable */
crm_periph_clock_enable(I2Cx_CLK, TRUE);
crm_periph_clock_enable(I2Cx_SCL_GPIO_CLK, TRUE);
crm_periph_clock_enable(I2Cx_SDA_GPIO_CLK, TRUE);
/* gpio configuration */
gpio_initstructure.gpio_out_type = GPIO_OUTPUT_OPEN_DRAIN;
gpio_initstructure.gpio_pull = GPIO_PULL_NONE;
gpio_initstructure.gpio_mode = GPIO_MODE_MUX;
gpio_initstructure.gpio_drive_strength = GPIO_DRIVE_STRENGTH_MODERATE;
/* configure i2c pins: scl */
gpio_initstructure.gpio_pins = I2Cx_SCL_PIN;
gpio_init(I2Cx_SCL_GPIO_PORT, &gpio_initstructure);
/* configure i2c pins: sda */
gpio_initstructure.gpio_pins = I2Cx_SDA_PIN;
gpio_init(I2Cx_SDA_GPIO_PORT, &gpio_initstructure);
/* configure and enable i2c interrupt */
nvic_irq_enable(I2Cx_EVT_IRQn, 0, 0);
nvic_irq_enable(I2Cx_ERR_IRQn, 0, 0);
i2c_init(hi2c->i2cx, I2C_FSMODE_DUTY_2_1, I2Cx_SPEED);
i2c_own_address1_set(hi2c->i2cx, I2C_ADDRESS_MODE_7BIT, I2Cx_ADDRESS);
}
}
int main(void)
{
i2c_status_type i2c_status;
/* config nvic priority group */
nvic_priority_group_config(NVIC_PRIORITY_GROUP_4);
system_clock_config();
at32_board_init();
hi2cx.i2cx = I2Cx_PORT;
i2c_config(&hi2cx);
while(1)
{
#if defined (MASTER_BOARD)
/* wait for key USER_BUTTON press before starting the communication */
while(at32_button_press() != USER_BUTTON)
{
}
/* start the request reception process */
if((i2c_status = i2c_master_transmit_int(&hi2cx, I2Cx_ADDRESS, tx_buf, BUF_SIZE, I2C_TIMEOUT)) != I2C_OK)
{
error_handler(i2c_status);
}
/* wait for the communication to end */
if(i2c_wait_end(&hi2cx, I2C_TIMEOUT) != I2C_OK)
{
error_handler(i2c_status);
}
delay_ms(10);
/* start the request reception process */
if((i2c_status = i2c_master_receive_int(&hi2cx, I2Cx_ADDRESS, rx_buf, BUF_SIZE, I2C_TIMEOUT)) != I2C_OK)
{
error_handler(i2c_status);
}
/* wait for the communication to end */
if(i2c_wait_end(&hi2cx, I2C_TIMEOUT) != I2C_OK)
{
error_handler(i2c_status);
}
if(buffer_compare(tx_buf, rx_buf, BUF_SIZE) == 0)
{
at32_led_on(LED3);
}
else
{
error_handler(i2c_status);
}
#else
/* wait for key USER_BUTTON press before starting the communication */
while(at32_button_press() != USER_BUTTON)
{
}
/* start the transmission process */
if((i2c_status = i2c_slave_receive_int(&hi2cx, rx_buf, BUF_SIZE, I2C_TIMEOUT)) != I2C_OK)
{
error_handler(i2c_status);
}
/* wait for the communication to end */
if(i2c_wait_end(&hi2cx, I2C_TIMEOUT) != I2C_OK)
{
error_handler(i2c_status);
}
if((i2c_status = i2c_slave_transmit_int(&hi2cx, tx_buf, BUF_SIZE, I2C_TIMEOUT)) != I2C_OK)
{
error_handler(i2c_status);
}
/* wait for the communication to end */
if(i2c_wait_end(&hi2cx, I2C_TIMEOUT) != I2C_OK)
{
error_handler(i2c_status);
}
if(buffer_compare(tx_buf, rx_buf, BUF_SIZE) == 0)
{
at32_led_on(LED3);
}
else
{
error_handler(i2c_status);
}
#endif
}
}
|