ADC — 循环重复转换 + DMA

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97

#include "at32f403a_407_board.h"
#include "at32f403a_407_clock.h"
__IO uint16_t adc1_ordinary_valuetab[3] = {0};
__IO uint16_t dma_trans_complete_flag = 0;

static void gpio_config(void)
{
  gpio_init_type gpio_initstructure;
  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE);

  gpio_default_para_init(&gpio_initstructure);
  gpio_initstructure.gpio_mode = GPIO_MODE_ANALOG;
  gpio_initstructure.gpio_pins = GPIO_PINS_4 | GPIO_PINS_5 | GPIO_PINS_6;
  gpio_init(GPIOA, &gpio_initstructure);
}

static void dma_config(void)
{
  dma_init_type dma_init_struct;
  crm_periph_clock_enable(CRM_DMA1_PERIPH_CLOCK, TRUE);
  nvic_irq_enable(DMA1_Channel1_IRQn, 0, 0);
  dma_reset(DMA1_CHANNEL1);
  dma_default_para_init(&dma_init_struct);
  dma_init_struct.buffer_size = 3;
  dma_init_struct.direction = DMA_DIR_PERIPHERAL_TO_MEMORY;
  dma_init_struct.memory_base_addr = (uint32_t)adc1_ordinary_valuetab;
  dma_init_struct.memory_data_width = DMA_MEMORY_DATA_WIDTH_HALFWORD;
  dma_init_struct.memory_inc_enable = TRUE;
  dma_init_struct.peripheral_base_addr = (uint32_t)&(ADC1->odt);
  dma_init_struct.peripheral_data_width = DMA_PERIPHERAL_DATA_WIDTH_HALFWORD;
  dma_init_struct.peripheral_inc_enable = FALSE;
  dma_init_struct.priority = DMA_PRIORITY_HIGH;
  dma_init_struct.loop_mode_enable = TRUE;
  dma_init(DMA1_CHANNEL1, &dma_init_struct);

  dma_interrupt_enable(DMA1_CHANNEL1, DMA_FDT_INT, TRUE);
}

static void adc_config(void)
{
  adc_base_config_type adc_base_struct;
  crm_periph_clock_enable(CRM_ADC1_PERIPH_CLOCK, TRUE);
  adc_reset(ADC1);
  crm_adc_clock_div_set(CRM_ADC_DIV_4);
  adc_base_default_para_init(&adc_base_struct);

  /* select combine mode */
  adc_combine_mode_select(ADC_INDEPENDENT_MODE);

  /* ADC1 config */
  adc_base_struct.sequence_mode = TRUE;
  adc_base_struct.repeat_mode = TRUE;
  adc_base_struct.data_align = ADC_RIGHT_ALIGNMENT;
  adc_base_struct.ordinary_channel_length = 3;
  adc_base_config(ADC1, &adc_base_struct);
  adc_ordinary_channel_set(ADC1, ADC_CHANNEL_4, 1, ADC_SAMPLETIME_239_5);
  adc_ordinary_channel_set(ADC1, ADC_CHANNEL_5, 2, ADC_SAMPLETIME_239_5);
  adc_ordinary_channel_set(ADC1, ADC_CHANNEL_6, 3, ADC_SAMPLETIME_239_5);
  adc_ordinary_conversion_trigger_set(ADC1, ADC12_ORDINARY_TRIG_SOFTWARE, TRUE);
  adc_dma_mode_enable(ADC1, TRUE);

  adc_enable(ADC1, TRUE);

  /* ADC calibration */
  adc_calibration_init(ADC1);
  while(adc_calibration_init_status_get(ADC1));
  adc_calibration_start(ADC1);
  while(adc_calibration_status_get(ADC1));
}

int main(void)
{
  nvic_priority_group_config(NVIC_PRIORITY_GROUP_4);
  system_clock_config();
  at32_board_init();
  at32_led_off(LED2);
  at32_led_off(LED3);
  at32_led_off(LED4);
  uart_print_init(115200);
  gpio_config();
  dma_config();
  adc_config();

  /* enable DMA after ADC activation */
  dma_channel_enable(DMA1_CHANNEL1, TRUE);

  printf("repeat_conversion_loop_transfer \r\n");
  printf("please_debug_check_data_and_conversion_times \r\n");

  /* ordinary software start conversion */
  adc_ordinary_software_trigger_enable(ADC1, TRUE);

  at32_led_on(LED2);
  while(1)
  {
  }
}